2026-11-15 · David Miller
Where Is the Sewer Cleanout on an Englewood Home and How Do You Use It
The sewer cleanout is a capped pipe that gives direct access to your home's main sewer line. On most houses you will find it in one of three places: on the basement floor or low on a basement wall near where the main drain leaves the house, outside in the yard within a few feet of the foundation (a 3- to 4-inch pipe with a threaded cap, often hidden in a flower bed), or, on homes without a basement, in a crawlspace or under a ground-level access plate. Knowing where yours is before a backup happens saves time and mess.
Why the cleanout matters in a backup
When several drains back up at once, the cleanout is the quickest way to tell where the blockage is. If the pipe is full of standing water when you look in, the clog is downstream, between the cleanout and the sewer main. If it is empty or flowing, the blockage is inside the house on a branch line. That one observation tells a technician whether to run a machine out toward the street or work on an indoor drain, which is why it is the first question we ask on a main sewer line call.
How to find it
- Basement homes: follow the large (usually 4-inch) vertical drain stack down to the floor. The cleanout is typically a Y-fitting with a square-headed or round plug near where the pipe turns horizontal and exits through the wall or floor.
- Outside: walk the side of the house that faces the street, or where the sewer runs to the alley. Look for a short white PVC or black ABS pipe with a cap, sometimes painted or buried under mulch. Older homes may have a cast-iron cap.
- Two-way cleanouts: some newer or repaired lines have a double cleanout near the property line, allowing access toward both the house and the street.
- No cleanout at all: some older homes have no accessible exterior cleanout. Clearing then goes through a basement fitting, a roof vent or by pulling a toilet, which takes longer.
Should you open it yourself?
Only with care. If the line is backed up, the cleanout is holding back sewage under pressure. Loosening the cap can release a sudden flow of wastewater onto your basement floor or yard. If you need to check it:
- Stop all water use in the house first, including the washer and dishwasher.
- Wear gloves and eye protection; sewage carries bacteria.
- Loosen the cap slowly, a quarter turn at a time, and stand to the side.
- If water starts seeping around the threads, tighten it back up and call for service rather than releasing it indoors.
Never pour chemical drain cleaner into a cleanout. It will not clear a main line blockage and makes the job hazardous for whoever opens the line next.
What a technician does at the cleanout
With the cap off, we feed a cable machine with a cutting head into the line toward the street. For roots in clay pipe, a root cutter shears them at the pipe wall. For grease or scale, hydro jetting may follow once the line is open and the pipe is confirmed sound. If the clog keeps returning, a camera run through the same cleanout shows exactly what is in the line and how far from the house it sits. Our post on preventing tree root clogs in older Englewood homes explains how roots reach older clay laterals.
Common cleanout problems
- Stuck or rusted plug: old cast-iron and brass plugs seize. Forcing them can crack the fitting; a technician may need to cut and replace the plug.
- Buried cleanout: landscaping often covers exterior cleanouts. A metal detector or a camera with a locator can help find it.
- Cracked cap: a broken cap lets soil and roots into the line and can let sewer gas out. Replacement caps are inexpensive and worth fitting.
- Cleanout too far inside: if the only access is deep inside a finished basement, consider having an exterior cleanout installed during any future sewer repair. It makes every later service call faster and cleaner.
When to install a new cleanout
If your home has no accessible cleanout and you have had more than one main line backup, adding one is usually worth it. It is typically done when the sewer lateral is excavated for a repair. Ask the sewer repair contractor you hire to handle any requirements for the work.
Quick checklist
- Find your cleanout now, before an emergency.
- Keep it clear of mulch, storage boxes and furniture.
- Make sure the cap is intact and can be turned.
- During a backup, stop water use and check it carefully, or leave it to a technician.
Live in a neighboring city? We clear main lines through the cleanout in Sheridan and the other suburbs around Englewood too.