A drain that clogs every few months has a cause that simple clearing does not remove. The most common are a grease layer in a kitchen line, roots growing back through a cracked joint, a sag (belly) where solids settle, scale in old cast-iron or galvanized pipe, or a pipe installed with too little slope. Each one needs a different fix.
We start by asking the history: which drain, how often, and what came out last time. Then we clear the line and, when the pattern suggests a pipe problem, run a camera inspection to see it. Grease and scale usually respond to hydro jetting. Roots in clay pipe can be managed with scheduled root cutting or stopped with a repair. A belly or broken section needs repair to stop the cycle.
Older Englewood homes can still have original clay or cast-iron sewer laterals, sometimes under mature trees, and roots are a common reason for repeat main line clogs. You get a straight answer on whether maintenance or repair is the cheaper path over time.
Technician insight
Paying for the same snaking every few months is the most expensive way to manage a bad pipe. One inspection usually shows whether it's a habit problem, a cleaning problem or a pipe problem.
Recurring Drain Clogs Services We Offer
✓Drain Camera Inspection
Utilizing high-resolution cameras to visually inspect the interior of your drain lines, identifying the exact cause and location of persistent blockages or damage.
✓Hydro-Jetting for Recurring Clogs
Employing high-pressure water streams to thoroughly scour pipe walls, removing stubborn grease, mineral buildup, and sludge that traditional snaking might miss.
✓Root Intrusion Removal & Prevention
Specialized techniques to cut through and remove tree roots that have infiltrated sewer lines, followed by recommendations to prevent future root growth.
✓Grease Trap Cleaning & Maintenance
Comprehensive cleaning and maintenance of grease traps for commercial properties, preventing common blockages caused by FOG (fats, oils, and grease) accumulation.
✓Pipe Descaling
Mechanical removal of hard mineral deposits and corrosion from the inside of pipes, restoring proper flow and preventing future blockages.
✓Partial Line Repair for Persistent Issues
Targeted repair or replacement of specific sections of damaged or collapsed pipe that are continuously causing recurring drain problems.
How it works
- 1
Initial Assessment & Consultation
We begin by discussing your history of recurring clogs, noting their frequency, location, and any patterns. This helps us understand the scope of the problem before any physical work begins.
- 2
Comprehensive Drain Camera Inspection
Using our advanced camera equipment, we perform a detailed inspection of your drain lines. This allows us to pinpoint the exact cause of the recurring issue, whether it's roots, grease buildup, pipe damage, or foreign objects.
- 3
Diagnosis & Solution Proposal
Based on the camera inspection, we provide a clear diagnosis of the problem and present you with the most effective, long-term solutions, explaining each option and its benefits.
- 4
Targeted Clog Resolution
We then implement the agreed-upon solution, which could range from hydro-jetting to clear stubborn buildup, to root removal, or even a targeted pipe repair, ensuring the issue is fully addressed.
- 5
Post-Service Inspection & Advice
After the work is completed, we often perform a final camera inspection to confirm the line is clear and functioning properly. We also provide advice on preventative maintenance to help avoid future recurring clogs.
Pricing
We give a written quote after inspection; the price depends on the line, the problem and access.